Are you paying a lot for electric bills month after month? Are you still trying to figure out how you will be able to lower your energy costs to somehow make paying easier?
If your electric meter is spinning as fast as a slot machine for as long as you can remember, then is time to be concerned.
You are not alone with this problem, many American households are trying to find ways on how to lower their electric bills just like you. To be specific, there are two ways on how to cut the cost of your electric bill, one is to minimize the use of your devices, two is to use home energy saving devices. The former deals with controlling your use of your devices and becoming more responsible in using them. The latter on the other hand entitles you to purchase specific devices to replace or add to your existing fixtures.
Focus on Major Energy Consumers
Among all the electronic devices you have in your home, the heating and cooling system and the water heating system are the two biggest contributors to your large electric bills. Focusing on how to reduce consumption on these two would certainly affect the figures of your electric bill.
Some other ways of reducing the cost of your monthly electrical bill through the following home energy saving devices.
Home energy saving devices:
Programmable Thermostats – Installing this device will let you set specific room temperature even if you are not home. The best example to use this is when you are often leaving the heating and cooling system as is when you leave home. Just set a temperature in a specific time and it will automatically adjust without you.
Remote Control Heating System – Even when you are away or if you are on your way back home or if you forgot to change the thermostat before leaving, the remote-controlled heating system works best, with a simple phone app, the thermostat will automatically change. The remote control heating system has a special device to give you this convenience.
Reducing Phantom Loads
All of the appliances employed at home contain the so-called switch wherein there are the on and off indicators. To run the home appliances, they need to be switched on. On the other hand, when they are no longer in use, they must be switched off.
The appliances, although they are not switched on and they are not in use, still consume electricity and yes, you’ve read this right. The pattern of the electricity’s outflow still continues although the appliances are in the off mode. They are termed as the “phantom loads” and they can consume great amounts of electricity. Thus, you end up finding your electrical bills in surmounting rates at the end of the billing period.
If you are interested in knowing how these “phantom loads” can be relatively stopped so that you will be able to save on your energy costs, switch to home energy saving devices where you can.
Devices used at home that are remote control operated also consume energy all around the clock. These devices need to be ready all the time in order to be prompted by the remote control. Although that state of readiness consumes less electricity, imagine the twenty-four-hour time frame and the energy they consume. Among the other devices that generate phantom loads include the cordless phones and recharging devices.
Switchable Outlets
So how do you save on the home energy consumed in each day? How will you be able to lessen the phantom power created by these devices? One of the easiest ways that you can commit to is the plugging of the devices into the switchable six-way outlets, iIn this manner, when the appliances have been turned off, you can easily turn off also the power supply that runs through the outlet. The switchable outlets are of enough importance for those wall warts or DC converters these home energy saving devices run at approximately 60 up to 80% of efficiency rate. To make the explanation simple and clear, these home energy saving devices will allow you to save a minimum of six percent on the entire monthly bill that you will have to pay for.
Enhancing Home Insulation
Updating your home with the use of home energy saving devices will definitely lessen the amount of electrical power that you consume and therefore reduce the number of your electrical bills. So as to save enough energy consumption, you can likewise improve the insulation of your home. Insulation may be enhanced in the floors, the walls, or the ceilings. Windows and doors which are all efficient can entirely make a difference.
You must be cautious though. Before you purchase any home energy saving devices, you’ve got to test them first. Most people happen to just buy whatever they come across with. It is not enough. You don’t want to end up realizing that you failed with your decision as you discover that the thing you’ve paid for is not worth investing on. In truth, home energy saving devices come in various brand names and are widely available. They are also simple to utilize as you just have to insert the device in between the wall outlet and the plug of the appliance.
You must be aware that there are two classifications of home energy saving devices marketed in the stores. The first is that which corrects the lag that gets in when a motor load is prompted on the power supply, the second is that which operates simply by the use of the on and off switches in a way that the average voltage is indeed reduced by the device.
Whichever home energy saving device you wish to purchase is, just make sure that what you pay for is something which is reliable, this is an investment and you do not want to fail in this endeavor.
Home Energy Saving Devices for Water Heating
The reduction of water consumption yields many good effects, and the number one effect we would like is the cost savings on hydro bills.
Low-Flow Showerhead – This device will save you save as much as 40% on your water consumption, and since you are using less water, your water heating system is also less used.
Multi-Setting Showerheads – There are several showerheads with settings such as pause, spray, pulse, turbo pulse, and outsider spray. These functions let you save on water and in turn heating requirement.
Toilet Flush Water Saver – This device would let you save as much as 25% of your water consumption.
Is It Worth Investing in These Devices?
In the first months of using these devices, you will certainly see savings, but since you have invested, the initial months will literally just pay back what you have spent to purchase these devices. In the long run, when you are using these devices for years, savings are evident.